MIL-STD-1623E(NAVY)
w/CHANGE 1
DEPARTMENT OF DEFENSE STANDARD
MIL-STD-3020 - Department of Defense Standard Practice for Fire Resistance of U.S.
Naval Surface Ships
(Copies of these documents are available online at https://assist.daps.dla.mil/online or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND
NAVSEA 05Z6 PD 5-04A - Mattress, Innerspring, Flame-Resistant, Shipboard
(Copies of this document are available from the Commander, Naval Sea Systems Command, ATTN: SEA 05Z,
1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160).
CODE OF FEDERAL REGULATIONS (CFR)
46 CFR 164.009 - Noncombustible Materials for Merchant Vessels
(Copies of this document are available from the Superintendent of Documents, U.S. Government Printing Office, Washington DC 20401 or online at www.gpoaccess.gov/index.html.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)
AATCC-135 - Dimensional Changes of Fabrics After Home Laundering
(Copies of this document are available from the American Association of Textile Chemists and Colorists, P.O. Box
12215, Research Triangle Park, NC 27709.)
ASTM INTERNATIONAL
ASTM D635 - Rate of Burning and/or Extent and Time of Burning of Self-
Supporting Plastics in a Horizontal Position, Standard Test Method for
ASTM D6413 - Flame Resistance of Textiles (Vertical Test), Standard Test Method for
ASTM E84 - Surface Burning Characteristics of Building Materials
ASTM E162 - Surface Flammability of Materials Using a Radiant Heat Energy
Source, Standard Test Method for
ASTM E648 - Critical Radiant Flux of Floor-Covering Systems Using a Radiant
Heat Energy Source, Standard Test Method for
ASTM E662 - Specific Optical Density of Smoke Generated by Solid Materials, Standard Test Method for
ASTM E1264 - Acoustical Ceiling Products, Standard Classification for ASTM F1066 - Tile, Floor, Vinyl Composition, Standard Specification for ASTM F1700 - Solid Vinyl Floor Tile, Standard Specification for
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business